Using the Menus

Line Select Menu

Pushing the LIN SEL menu button enables the line select mode and provides the line select menu display. The middle bezel control is assigned to select the line number. The following choices can be made using the bezel buttons.

1740A--Series

HFIELD — ALL or 1of 2

H1H or 15H (one line or 15 lines)

HNEXT FIELD — (appears only when 1of 2 FIELD is

selected.) Push the bezel button corresponding to NEXT FIELD to sequence through the fields designated by the FIELD selection. A box flashes momentarily around the on-screen label to verify that the selection has been made.

1750A--Series

HFIELD — ALL or 1of2 or 1of 4 or 1of8

H1H or 15H (one line or 15 lines)

HNEXT FIELD — (appears only when 1of 2, 1of4, or

1of 8 FIELD is selected.) Push the bezel button corresponding to NEXT FIELD to sequence through the fields designated by the FIELD selection.

HALT 2 FIELD — (appears only when 1of 4 FIELD is selected.) Push the bezel button corresponding to ALT 2 FIELD to toggle between the current field and

the second next field; for example, FIELD1 and

FIELD3.

HALT 4 FIELD — (appears only when 1of 8 FIELD is selected.) Push the bezel button corresponding to ALT 4 FIELD to toggle between the current field and

the fourth next field; for example, FIELD1 and

FIELD5.

3-14

1740A/1750A Series Waveform/Vector Monitor User Manual