Featuresand Accessories
P7225 2.5 GHz 10X Active Probe UserManua l 9
Table1: P7225 features and standard accessories (Cont.)
Feature/Accessory Description
Squarepin
socket
Square pin socket.The square pinsocket is
idealfor use with signal/ground pairs on 0.100
inchsquareheader pins.
Attach the socketby gently pressing it into the
ground socketon the probe head.
Be sure to use the stabilization notch w henever
possibleto avoid slipping and damaging the
probe or circuitryunder test.
Tektronixpart number: 016-1773-10 (pkg of 10)
SureToeadapter
SureToeprobe adapter (4 ea).The SureToe
adapter isa pointed probe tip useful for probing in
dense circuitry.Attach the SureToe adaptersthe
samew ayas the push-in probe tips.
Do not force the adapter.Also,be careful not to
poke yourselfwith the sharp probe tip. SureToe
adapters canbe used with any of the socketed
accessoryleads.
Tektronixpart number: ST501 (pkg of 12)
KlipChip
Y-leadadapter
SMT KlipChip.Use the SMT KlipChip test clips
to accessfragile, dense circuitry.
Youcan connect the KlipChip test clips to a
Y-leador three-inch ground leads. To connect,
pressthe lead socket into the KlipChip handle.
The KlipChipbody turns freely, allowing better
probe orientation.To reduce stress and provide a
lower profileon components being tested, the
flexiblesleeve of the KlipChip bends up to a
35 degree angle.
Tektronixpart number: 206-0364-XX (2 each)