Featuresand Accessories
P7225 2.5 GHz 10X Active Probe UserManua l 13Table2: P7225 optional accessories (Cont.)Accessory Description
TekConnectInterface calibration fixture. The
calibrationfixture is required when a performance
verificationor adjustment is done on the probe. It
providesconnectors and test points for internal
probe measurements.
Tektronixpart number: 067-0422-XX
SMA-to-probe tip adapter.Use the adapter to
connectthe probe to SMA cables and for
calibrationand performance verification. The
adapter includesa 50 -ohmSMA terminator.
Tektronixpart number: 015--0678--XX
IEEE1394 Adapter.The IEEE1394 Adapter
allowsyou to probe signals on the bus, external
to system enclosures, without disturbing system
operation. The adapter maintainsa balanced
50-ohm signalpath and can be used in both
single-endedand differential modes.
Tektronixpart number: 679-5027-XX
PPM100 Probe Positioner.The PPM100 is a
general purposebench top probe holder with
flexiblearm, designed for hands-free probing and
fine positioningadjustments. The heavy duty base
can be replacedwith the clamp for securing the
probe arm ina variety of situations. Use flexible
retention ringsto attach the probe to the probe
holder.
Tektronixpart number: PPM100