Telex BTR-300 operating instructions BC-300NM2 Battery Charger

BC-300NM2 BATTERY CHARGER

NOTE: The BC-300NM2 is not supplied with the TR-300. See “Accessory” Section for or- dering information.

Remove the battery holder from the TR-300.

CAUTION

DO NOT ATTEMPT TO CHARGE ANY ALKALINE BATTERIES WITH THIS CHARGER.

Snap the terminal connector onto the battery holder and plug the charger into a 110 Volt outlet.

Full charge of the battery pack is obtained af- ter 12 to 14 hours. A full charge will last 15 -17 hours with nickel-metal hydride batteries.

Extensive over-charging may damage or de- stroy the batteries. Please ensure the charging time does not exceed 24 hours.

Unplug the charger when not in use.

Figure 38

BC-300NM2 Battery Charger

-32-