BTR-300 BASE STATION TRANSCEIVER

TECHNICAL INFORMATION

SPECIFICATIONS BTR-300

Input Power (minimum)

12V AC/DC at 360 mA

Intercom Output

330 mV (Low) or 1 V (Hi) RMS into 300 ohm load typical (at rated deviation)

Intercom Input (Gain Minimum)

300 mV RMS typical (for rated deviation)

Auxiliary Output

2 V RMS into 600 ohm load typical (at rated deviation)

Auxiliary Input (Gain Maximum)

60 mV RMS typical (for rated deviation)

Local Headset Input

2 mV RMS input nominal

 

 

1.5 mV RMS input at compression (Dynamic)

Local Headset Output

.............................................................

32 mV maximum output into 600 ohmst

Speaker/Local Monitor Output (into 8 Ohms)

2 Watts (at rated deviation)

Temperature Range

-4￿F to 130°F (-20°C to 55°C)

Dimensions

15.75” W x 1.75” H x 10.5” D

 

 

(40 cm x 4.5 cm x 26 cm)

Weight

4.5 lbs (2 kg)

 

Transmit

RF Frequency Range

150-216 MHz

RF Frequency Stability

Crystal Controlled, 0.005%

RF Power Output

50 mW Typical

Modulation

FM, 3 KHz deviation.

 

115 micro-seconds Pre-emphasis

Transmit Antenna

5/8-wave (supplied)

 

SO239 connector on chassis

Modulation Limiter

Internal Compressor

Modulation Frequency Range

300 to 5000 Hz ±2 dB

Radiated Harmonics and Spurious Emissions

-45 dBC,

 

Exceeds FCC Specifications

FCC

Type Accepted Under Parts 90 and 74

-3-

Page 5
Image 5
Telex operating instructions BTR-300 Base Station Transceiver, Technical Information Specifications BTR-300