Telex BTR-300 operating instructions Receive, Features

	SPECIFICATIONS BTR-300 (Cont.)
	Receive
RF Frequency Range	150-216 MHz
RF Frequency Stability	Crystal Controlled, 0.005%
Type	Dual conversion superheterodyne, FM
RF Sensitivity	Less than 0.6 µV for 12 dB SINAD
IF Selectivity	3 dB at 30 kHz (4 pole Monolythic Filter)
Image Rejection	65 dB or better
Squelch Quieting	90 dB
Squelch Threshold	1.0 µV (Internal)
Signal-to-Noise Ratio	90 dB
Receive Antenna	5/8-wave (supplied)
	SO239 connector on chassis
Distortion	Less than 1% at Rated Output

FEATURES

The RadioCom Model BTR-300 is a Base Station with one transmitter and four re- ceivers. It is designed for portable two way communication with the capability for inter- face to other audio systems. Features include:

￿An extremely flexible unit that has the capa- bility to communicate at one time with up to four portable stations and wired stations (in- tercom and/or other audio source).

￿Powered by an external AC supply via the power jack on the rear of the unit. It can also be powered by any 12V AC/DC 700 mA source.

￿Intercom connections with the ability to in- terface with most wired intercom systems.

￿RF light indicator for each portable station.

￿All metal case for superior shielding.

￿Table or rack mountable.

-4-