RACK MOUNTING

To rack mount the BTR-300 base transceiver do the following:

Remove the front two #6-32 x 3/8” screws on each side of the transceiver as shown in Figure 9.

Place the rack mount brackets (supplied) on either side of the unit and insert three #6-32 x 3/8” screws for each bracket. Tighten the screws securely.

Insert the BTR-300 into your 19” rack enclo- sure and insert four (4) #10-32 x 3/8” Phillips pan head screws (supplied) in each corner of the rack mount brackets and secure to your en- closure.

REMOVE SCREWS (TYPICAL BOTH SIDES)

Figure 9

Attaching Brackets for Rack Mounting

-15-

Page 17
Image 17
Telex BTR-300 operating instructions Attaching Brackets for Rack Mounting