RAM Card
4. Holding the keyboard, set the computer upright. Place the keyboard in front of you with the
keys facing down as shown in the following figure.
Caution: Prevent possible component damage cause by electrostatic discharge (ESD). Use a high-impedance,
grounded-conductive floor mat or wrist strap to prevent ESD. Before touching the Integrated
circuit devices, discharge static electricity from your hands, tools, and containers by touching them
to a grounded surface.
5. With the connector side of the RAM card facing up, slide the card along the guides so that
the connector on the RAM card fully mates with the rear connector in the computer. The
first M byte RAM card is inserted into the rear connector. A second RAM card, if
installed, is inserted into the front connector.
TravelMate 2000 Options 6-13