Texas Instruments MSP-FET430 manual Get Started Now

Get Started Now!

3)Click on the tab at the bottom of the workspace window that corresponds to your tool (FETxxx) and desired language (assembler or C).

4)Use PROJECT->OPTIONS->FET Debugger->Setup->Connection to select the appropriate port: LPTx for the parallel FET Interface or TI USB FET for the USB Interface.

5)Use PROJECT->REBUILD ALL to build and link the source code. You can view the source code by double-clicking on the project, and then double- clicking on the displayed source file.

6)Use PROJECT->DEBUG to start the C-SPY debugger. C-SPY will erase the device Flash, and then download the application object file to the device Flash.

Refer to FAQ, Debugging #1) if C-SPY is unable to communicate with the device.

7)Use DEBUG->GO to start the application. The LED should flash!

8)Use DEBUG->STOP DEBUGGING to stop debugging, to exit C-SPY, and to return to the Workbench.

9)Use FILE->EXIT to exit the Workbench.

Congratulations, you’ve just built and tested your first MSP430 application!

1-5