Texas Instruments MSP-FET430 manual B.1 History of changes to MSP-TS430PM64 Target Socket module

Hardware

B.1 History of changes to MSP-TS430PM64 Target Socket module

Changes from Rev. 0.1 to 1.0:

Connector J5 for external power was added Connectors FETJ2 and FETJ3 were removed C8 was changed from 100nF to 10nF

R5 was changed from 100k to 47k

R13 and R14 were added to support BSL usage on F413. They are not assembled

R4 was removed

Changes from Rev. 1.0 to 1.1:

Connection JTAG/6 <-> J1/9: R4=0Ohm was inserted. R4 is not assembled. This isolates XOUT from the JTAG connector.

On Rev. 0.1, power can be found or should be supplied on the target pins: J1/1(DVcc), J4/16(AVcc), J4/15(DVss) and J4/14(AVss). Vcc can also be applied to FETJ2-2 and Vss can also be applied to FETJ2-4.

B-12