Texas Instruments MSP-FET430 C.1.14 EMULATOR-GIE on/off, C.1.15 EMULATOR-LEAVE TARGET RUNNING

FET Specific Menus

C.1.14 EMULATOR->GIE on/off

Enables or disables all interrupts. Needs to be restored manually before GO.

C.1.15 EMULATOR->LEAVE TARGET RUNNING

If C-SPY is closed, the target keeps running the user program.

C.1.16 EMULATOR->FORCE SINGLE STEPPING

On GO the program is executed by single steps. Only in this mode the cycle counter works correctly.

C.1.17 EMULATOR->SET VCC

On the USB FET the target supply voltage can be adjusted between 1.8V and 5.0V. This voltage is available on pin 2 of the 14-pin target connector to supply the target from the USB FET. If the target is supplied externally, the external supply voltage should be connected to pin 4 of the target connector, so the USB FET can set the level of the output signals accordingly.

Note: Availability of EMULATOR->ADVANCED menus

Not all EMULATOR->ADVANCEDmenus are supported by all MSP430 devices. These menus will be grayed-out.

C-4