Required accessories and tools
1. Supplied accessories
-Installation instructions
-Operating instructions
-Installation kit
2. Optional accessories
Basic Combination Side0by0Side Sealing kit •BSEALKIT10"
For permanent connection of two individual appliances, e. g. Freezer next to Refrigerator.
Extreme Combination Side0by0Side Heating kit •XHEATKIT10"
a)If the gap between the appliances is less than 6" (160 mm).
b)For permanent connection of two appliances with a freezing function, e. g. Freezer or Bottom Mount appliance next to Freezer.
Extra long finger protection part
Panel unification part •FPCONNTS10" (Metal strip)
For connection of two furniture doors.
3.Other required accessories from specialist outlets
Ice maker installation kit ¼" OD copper line
-Cutter with adjustable blade
-Metal tape measure
-Square
-Spirit level length 2' (60 cm) and 4' (1,2 m)
-Markingout level, length at least 4' (1.2 m) for individual appliances or 7' (2.0 m) for SidebySide installation
5. Other
-Stepladder
-Dolly, hand truck
-Hammer drill for drilling holes in wall or floor
-Bits according suitable for material and in different sizes
-Wooden beam (cross section min. 3" x 4" (75 cm x 100 cm) as an alternative tilt protection, length according to the width of the installation cavity
-Wooden screws in different sizes
-Thin (max. 1/16" (1.5 mm)), suitable material to protect the floor from damage (e.g. lino)
-Suitable material for covering and protecting furniture (e.g. protective sheets)
-Adhesive tape
For connecting appliances which require water, e.g. for an ice maker.
iMaximum outer diameter of the water pipe
(without fittings): | 13/32" (10 mm). |
4. Tools
-Cordless screwdriver T20
-Torx screwdriver T20
-Torx bit T20 + magnetic holder
-5/16" (8 mm) hex nut driver
-Wood drills in different sizes
-Open end wrench ½" (SW 13 mm)
-Multigrip pliers
-Adjustable wrench
11