Wood floor application
Use the (5 x 60 mm) and (4 x 15 mm) wooden screws provided.
qDrill pilot holes:
1/8" (3 mm) for the (5 x 60 mm) wooden screws 5/64" (2 mm) for the (4 x 15 mm) wooden screws
Being certain the screws penetrate through the flooring and into the wall plate a minimum of 3/4" (19 mm).
qAttach the antitipbracket completely. Be sure screws hold tight.
qClean hole or continue drilling additional depth.
qManually insert the screw into the wall plug until the screw begins to resist.
qKnock the wall plug and screw into the hole until the screw head is approx. ½" (13 mm) from the antitip bracket.
iThe distance D between the antitipbrackets is adequately the width of the appliance.
Concrete floor applications |
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
| i | The distance D between the antitipbrackets is | |
d | CAUTION | d | ||||
|
| |||||
|
|
|
|
| adequately the width of the appliance. | |
Always wear safety glasses and other necessary protective devices or apparel when installing or working with anchors ; risk of injury!
Not recommended for use in lightweight masonry material such as block or brick.
Not recommended for use in new concrete which has not had time to cure.
Do not use core drills to drill holes for this anchor.
Use concrete anchor M8 and M8 srew. Additional use the (5x60 mm) and (4x15 mm) wooden screws provided.
qDrill a 10 mm diameter hole any depth exceeding the minimum embedment. Use the provided drill.
14