11.Attaching the appliance to the top of the cavity
qUnscrew the heightadjustable feet until the mark on the base has reached the indicated guide dimension (1¼" / 32 mm).
iIt is very important to comply with this dimension for the subsequent alignment of the furniture fronts.
qAlign the furniture fronts with the spirit level.
iNote:
-Do not twist or jam the appliance inside the cavity! When unscrewing the heightadjustable feet, proceed gradually: Always alternate between left and right, left and right, etc..
-The adjustment of the rear feet is facilitated if the appliance is unloaded at the rear.
-If using a wooden beam as an alternative antitip device according to point 5 of this installation manual, rotate the appliance all the way towards the wooden beam.
qScrew the attachment plate lugs (top) to the overhead furniture/fixtures.
qFix the attachment plate side lugs (top) depending on the installation situation. If there is no gap or only a slight gap, it is not necessary to fix the side lugs.
qIf there is a fairly large gap above the appliance, fit a wooden beam above the appliance, ensuring that the wooden beam fits the gap exactly.
18