qMark a vertical line under the outermost fixing holes in the adjusting rail.
qUsing a square, extend the drill hole marks which you have just made to the vertical marks.
qMark and drill the holes.
qScrew on the fixing plates (4x).
22.Attaching the furniture door (freezer compartment)
iNow fit the furniture handles which are screwed from behind!
qHang the furniture door with adjusting rail over the double threaded bolts.
qScrew the nuts a little onto the double threaded bolts. Do not tighten!
qPrecisely adjust the furniture door.
Align the furniture door with the double threaded bolts (Torx screwdriver).
qAttach the bracket:
-Lift the furniture door slightly away from the appliance door.
-Push the side bracket on the left and right over the screws 1.
-Insert the side bracket on the left and right into the fixing plate and slide over the screw 2. Slowly lower the door.
Continue the process until the last side brackets (3.) have been inserted into the fixing plates and are positioned on the screws.
iThe two upper brackets (1. ; on the left and right) have no side piece for insertion into the fixing plate.
qClose the door and check that the depth of the furniture front is aligned with the adjacent fronts. If required, correct.
qTighten the bracket screws to fix the depth alignment.
qClose the door and check the side alignment. Correct by gently tapping the edge of the open furniture door with your hand.
27