Thermador POD 302 manual To set the Clock Time and Stop Time, English

Stop Time

Use STOP TIME to delay the start of a timed mode. Enter the desired time for the mode to end. The oven calculates the proper start time. It starts and stops auto- matically.

m

Caution:

To maintain food safety, do not leave food in the oven for more than one hour before or after cooking.

Note: a separate digital clock must be set before starting Stop Time. This is indi- cated by "CLOCK TIME" in the display.

To set the Clock Time and Stop Time:

1.Set the Cook Time as described in "Cook Time".

2.Press SELECT.

"CLOCK TIME" and the flashing Clock Time numbers appear in the display.

3.Use the "+" and "-" buttons to set the Clock Time (sets the current time of the day).

4.Press SELECT.

"CLOCK TIME" disappears and "STOP TIME" appears.

5.Use the "+" and "-" buttons to set the Stop Time. Example: Stop Time is at 12:00:

The numbers stop flashing after a few seconds and the oven enters delayed mode. The oven turns on when it is time to start.

The oven turns off and a beep sounds at the end of the programmed time. Press "+" and "-" simultaneously, or open the oven door to clear.

Note:

•Stop Time cannot be used if a temperature probe is in use.

•The maximum Stop Time is 11:59 hours.

English 15