Thermador GGN36, SGNCV36G Cooktop Operation, Control Knob - All Standard Burners, How They Work

Models: GGNCV365 GGNCV36 GGN365 GGN30 GGN36 GGNCV30 SGN30 SGN36G SGNCV36G

1 32
Download 32 pages 9.27 Kb
Page 13
Image 13
COOKTOP OPERATION

Section Four: Using the Cooktop

COOKTOP OPERATION

CONTROL KNOB — ALL STANDARD BURNERS

THERMADOR® EXTRALOW™ BURNERS (ModelsGGS/SGS)

GlassOFF Models

HI

LO

Porcelain/Stainless Models

The left front 9,100 BTU/HR burner and left rear 11,000 BTU/HR burner are designed to provide flame set- tings which enable you to simmer, poach, melt and hold cooked food at a serving temperature, without scorching or burning. This is accom- plished by cycling the flame OFF and ON for varying lengths of time.

STANDARD BURNER CONTROL KNOB SETTINGS

All the controls are push in to turn and have an infinite number of heat settings, with no fixed positions. Select the appropriate control knob and turn it counterclockwise to the HI position (detent) until the burner lights. Adjust the flame size. Turn off by turning the control clockwise to OFF.

CONTROL KNOB —

Thermador® ExtraLow™ BURNERS

HOW THEY WORK

• The BTU/HR usage on the 9,100

BTU/HR burner ranges from HI

(at 9,000) to XLO (at 300). The

BTU/HR usage on the 11,000

BTU/HR burner ranges from HI

GGSOFF

Glass

Models

HIXLO

LO

SGS

Porcelain/

Stainless Models

(at 11,000) to XLO (at 365).

• There are an infinite number of

settings between HI and XLO; the

control knob can be set at any po-

sition.

• The burner flame will pulse ON

and OFF when the setting is at any

position between LO and XLO.

• The length of time the flame is ON

ExtraLow™ CONTROL KNOB SETTINGS

Both ExtraLow controls are push in to turn and have an infinite number of heat settings, with no fixed positions. The ExtraLow settings are between XLO and just after LO, at the detent, shown by the broken line.

 

 

3

2

 

4

1

 

3

 

5

1

2

4

1

 

5

and OFF varies.

• With a setting just below LO, the

flame will be ON approximately

50 seconds and OFF 10 seconds of

each minute.

• With a setting at the XLO position,

the flame is ON approximately 10

seconds and OFF 50 seconds of

each minute.

FOR THE BEST RESULTS

1.ExtraLow™ 300 to 9,100 BTU/ HR Burner and Control Knob

2.ExtraLow™ 365 to 11,000 BTU/HR Burner and Control Knob

3.950 to 6,500 BTU/HR Burner and Control Knob (Models

GGSCV365 and GGS365)

4.1300 to 9,100 BTU/HR Burner and Control Knob

5.1650 to 11,000 BTU/HR Burner and Control Knob

Model GGS365

Temperature control will be more accurate if a lid is used.

Bring food to a rolling boil; stir well to be sure all the food is boil- ing; cover and reduce the heat to just below LO.

Check periodically to see if the control knob should be turned to a lower setting.

Page 11

Page 13
Image 13
Thermador GGN36, SGNCV36G Cooktop Operation, Control Knob - All Standard Burners, THERMADOR EXTRALOW BURNERS ModelsGGS/SGS