Thermador GGN36 Propane Installation, Propane Gas Installation, CGA 1.1 DOMESTIC GAS RANGES

PROPANE INSTALLATION

PROPANE GAS INSTALLATION

The cooktop is ready for use with natural gas. It may be converted for use with propane gas using the Burner Propane Conversion Kit, Model NLPKIT6, Part Number 35-00-688. A qualified service techhnican or installer can convert the cooktop. Be sure the unit being installed is correct for the type of gas being used. Refer to the Rating plate on the right side underneath the cooktop, see pages 7 to 10 for the location.

CAUTION

When connecting the unit to propane gas, make certain the propane tank is equipped with its own high pressure regulator. In addition the pressure regulator supplied with the cooktop must be on the inlet gas pipe of this unit. The maximum gas pressure to this appliance is not to exceed 14.0 inches water column from the propane gas tank pressure regulator.

TESTED IN ACCORDANCE WITH ANSI Z21.1, STANDARD FOR HOUSEHOLD COOKING GAS APPLIANCES, and CAN/

CGA 1.1 DOMESTIC GAS RANGES.

Check your local building codes for the proper method of installation. In the ab- sence of local codes this unit should be installed in accordance with the National Fuel Gas Code No. Z223.1 Current Issue and National Electrical Code ANSI/NFPA No. 70 Current Issue or the CAN - B149 Installation Codes for Gas Burning Appli- ances and C22.1 Canadian Electrical Code Part 1.

Page 2