Manuals / Thermal Comfort / Power Tools / Welder

Thermal Comfort 3000 manual Rear Panel Parts Replacement

Models: 3000

1 86
Download 86 pages 31.64 Kb
Page 40
Image 40

3.Remove the Coolant Hose from the Internal Cool- ant Filter Assembly.

4.Remove the Internal Coolant Filter from the fitting on the Radiator.

5.Install the replacement Internal Coolant Filter As- sembly by reversing the above procedure and not- ing the following:

•Clean the old thread sealer from the threads of the hose and the fitting.

•Apply a thin coating of liquid teflon thread sealer to the threads of the fitting.

B.Radiator Replacement

1.Remove the Left and Right Side Panels per Section 5.04-B.

2.On the right side of the radiator locate the Hose Assembly connected to the input of the Radiator at the top.

3.Remove the Hose Assembly from the Radiator in- put connection.

4.Remove the Internal Coolant Filter per paragraph 'A' above.

5.On the top and bottom of the Radiator remove the six screws and star washers that secure the Radia- tor to the Front Panel.

6.Carefully slide the Radiator out of the unit.

7.Install the replacement Radiator by reversing the above procedure.

C.Bias PC Board Replacement

1.Remove the Right Side Panel per Section 5.04-B.

2.Disconnect all the wiring connections to the Bias PC Board Assembly.

3.Remove the Bias PC Board Assembly from four PC Board Standoffs.

4.Install the replacement Bias PC Board Assembly by reversing the above procedure.

D.Transformer (T2) Assembly Replacement

The Tramsformer (T2) Assembly is mounted to the rear of the Horizontal Chassis Panel and has 25.2 VCT (Center Tap) output.

1.Remove the Left Side Panel per Section 5.04-B.

2.Disconnect all the wiring connections to the Trans- former Assembly.

3.Remove the four screws which secure the Trans- former Assembly to the Horizontal Chassis Panel.

4.Carefully remove the Transformer Assembly from the unit.

5.Install the replacement Transformer Assembly by reversing the above procedure.

E.Internal Fuse (F3) Replacement

The Fuse (F3) is located inside the Power Supply be- hind the Right Side Panel. The Fuse is mounted next to the Bias PC Board on the rear of the Horizontal Chassis Panel.

1.Remove the Right Side Panel per Section 5.04-B.

2.Locate the Fuse mounted next to the Bias PC Board on the Horizontal Chassis Panel.

3.Remove the damaged Fuse from the snap type fuse holder.

4.Reinstall the replacement Fuse (1A, 250V) by re- versing the above procedure.

F.Fuse Holder (Internal) Replacement

1.Remove the Left Side Panel per Section 5.04-B.

2.Remove the Fuse from the holder.

3.Disconnect the two wires connected to the Fuse Holder.

3.Remove the two small screws securing the Fuse Holder to the chassis.

4.Install the replacement Fuse Holder by reversing the above procedure.

5.07 Rear Panel Parts Replacement

NOTE

Refer to Section 6.06, Rear Panel Parts Replace- ment, for parts list and overall detail drawing.

A.Fan Replacement

1.Remove the Left Side Panel per Section 5.04-B.

2.Locate the Fan Assembly wiring connector inside the Rear Panel.

3.Carefully disconnect the wiring connector from the wiring harness.

4.Note the pin location of each wire to the connector.

5.Using a pin extraction tool remove the wiring from the connector.

6.On the Rear Panel remove the strain relief securing the Fan Assembly wiring to the Rear Panel.

REPLACEMENT PROCEDURES

36

Manual 0-2533

Page 39 Page 41
Page 40
Image 40
Thermal Comfort 3000 manual Rear Panel Parts Replacement
Page 39 Page 41

3000 specifications

Thermal Comfort 3000 is an innovative solution designed to enhance indoor climate by ensuring optimal thermal comfort for users. As the demand for energy efficiency and sustainable building practices grows, Thermal Comfort 3000 emerges as a key player in providing customizable and effective climate control systems.

One of the main features of Thermal Comfort 3000 is its advanced smart technology that allows for precise temperature regulation based on real-time data. It utilizes sensors that monitor indoor and outdoor temperatures, humidity levels, and even occupancy patterns. This data is then analyzed to optimize the heating and cooling systems, ensuring that energy is used efficiently. With its ability to automatically adjust to changing conditions, users can enjoy a consistent and comfortable environment without excessive energy consumption.

Thermal Comfort 3000 is built with user convenience in mind. It comes equipped with a user-friendly interface that enables easy adjustments and programming. Through a dedicated mobile app, users can control their indoor climate remotely, providing flexibility for those with busy lifestyles. Furthermore, the system offers customizable settings that cater to individual preferences, ensuring that everyone in a space can enjoy their ideal thermal environment.

The technology behind Thermal Comfort 3000 incorporates sustainable practices, utilizing eco-friendly refrigerants and energy-efficient components. This not only reduces the carbon footprint of buildings but also lowers energy costs for users. The system can be integrated with renewable energy sources, such as solar panels, creating a truly sustainable heating and cooling solution.

Thermal Comfort 3000 also features advanced filtration systems that improve indoor air quality. By removing allergens, dust, and other pollutants from the air, it promotes a healthier living environment. This is especially beneficial for individuals with allergies or respiratory issues, making Thermal Comfort 3000 an excellent choice for homes and commercial spaces alike.

In summary, Thermal Comfort 3000 represents the future of climate control technology. Its combination of smart features, user-centric design, and sustainability makes it an ideal solution for enhancing thermal comfort in any indoor environment. With its innovative approach, it not only ensures comfort but also promotes energy efficiency and environmental responsibility, making it a worthwhile investment for modern living.