NOTE

Refer to Subsection 6.08, Upper Chassis Replace- ment Parts for part numbers and detail drawing.

1.Remove the Right Side Panel per Section 5.04-B.

2.Disconnect the Hose Assembly from the T-Fitting at the front panel Coolant Pressure Gauge connec- tor.

3.Disconnect the other end of the Hose Assembly from the Coolant Pressure Gauge.

4.Remove the Hose Assembly from the unit.

5.Install the replacement Hose Assembly by revers- ing the above procedure.

E.Secondary Gas Hose (T-Fitting to SECONDARY GAS Connector) Assembly Replacement

The Secondary Gas Hose Assembly goes from the T- Fitting to front panel SECONDARY GAS connector. Replace the Hose Assembly using the following pro- cedure:

NOTE

Refer to Subsection 6.08, Upper Chassis Replace- ment Parts for part numbers and detail drawing.

1.Remove the Right Side Panel per Section 5.04-B.

2.Disconnect the Hose Assembly from the T-Fitting on the Check Valve from the Secondary Gas Regu- lator Assembly.

3.Disconnect the other end of the Hose Assembly from the front panel SECONDARY GAS Connec- tor.

4.Remove the Hose Assembly from the unit.

5.Install the replacement Hose Assembly by revers- ing the above procedure.

F.Plasma Gas Hose (PLASMA GAS to T- Fitting) Assembly Replacement

The Plasma Gas Hose Assembly goes from the front panel PLASMA GAS connector to the T-Fitting on the Plasma Pressure Gauge Assembly. Replace the Hose Assembly using the following procedure:

NOTE

Refer to Subsection 6.08, Upper Chassis Replace- ment Parts for part numbers and detail drawing.

1.Remove the Right Side Panel per Section 5.04-B.

2.Disconnect the Hose Assembly from the front panel PLASMA GAS connector.

3.Disconnect the Other end of the Hose Assembly from the T-Fitting at the Plasma Pressure Gauge Assembly.

4.Remove the Hose Assembly from the unit.

5.Install the replacement Hose Assembly by revers- ing the above procedure.

G.Coolant Supply Hose (Coolant Filter to Pump) Assembly Replacement

The Coolant Supply Hose Assembly goes from the rear panel Coolant Filter Assembly to the Pump Assem- bly. Replace the Hose Assembly using the following procedure:

NOTE

Refer to Subsection 6.07, Base Assembly Replace- ment Parts for part numbers and detail drawing.

1.Remove the Right Side Panel per Section 5.04-B.

2.Disconnect the Hose Assembly from the Coolant Filter Assembly on the rear panel.

3.Disconnect the other end of the Hose Assembly from the Pump Assembly.

4.Remove the Hose Assembly from the unit.

5.Install the replacement Hose Assembly by revers- ing the above procedure.

H.Coolant Supply Hose (Tank to Coolant Filter) Assembly Replacement

The Coolant Supply Hose Assembly goes from the Coolant Tank to the Coolant Filter Assembly mounted on the rear panel. Replace the Hose Assembly using the following procedure:

NOTE

Refer to Subsection 6.06, Rear Panel Replacement Parts for part numbers and detail drawing.

1.Drain the coolant from the Coolant Tank per Sec- tion 4.02-F.

CAUTIONS

The coolant must be drained from the unit as the coolant will drain out the hose connection on the side of the Coolant Tank .

Handle and dispose of the used coolant per recom- mended procedures.

2.Disconnect the other end of the Hose Assembly from the Coolant Tank.

REPLACEMENT PROCEDURES

48

Manual 0-2533

Page 51 Page 53
Page 52
Image 52
Thermal Comfort 3000 manual Drain the coolant from the Coolant Tank per Sec- tion 4.02-F
Page 51 Page 53

3000 specifications

Thermal Comfort 3000 is an innovative solution designed to enhance indoor climate by ensuring optimal thermal comfort for users. As the demand for energy efficiency and sustainable building practices grows, Thermal Comfort 3000 emerges as a key player in providing customizable and effective climate control systems.

One of the main features of Thermal Comfort 3000 is its advanced smart technology that allows for precise temperature regulation based on real-time data. It utilizes sensors that monitor indoor and outdoor temperatures, humidity levels, and even occupancy patterns. This data is then analyzed to optimize the heating and cooling systems, ensuring that energy is used efficiently. With its ability to automatically adjust to changing conditions, users can enjoy a consistent and comfortable environment without excessive energy consumption.

Thermal Comfort 3000 is built with user convenience in mind. It comes equipped with a user-friendly interface that enables easy adjustments and programming. Through a dedicated mobile app, users can control their indoor climate remotely, providing flexibility for those with busy lifestyles. Furthermore, the system offers customizable settings that cater to individual preferences, ensuring that everyone in a space can enjoy their ideal thermal environment.

The technology behind Thermal Comfort 3000 incorporates sustainable practices, utilizing eco-friendly refrigerants and energy-efficient components. This not only reduces the carbon footprint of buildings but also lowers energy costs for users. The system can be integrated with renewable energy sources, such as solar panels, creating a truly sustainable heating and cooling solution.

Thermal Comfort 3000 also features advanced filtration systems that improve indoor air quality. By removing allergens, dust, and other pollutants from the air, it promotes a healthier living environment. This is especially beneficial for individuals with allergies or respiratory issues, making Thermal Comfort 3000 an excellent choice for homes and commercial spaces alike.

In summary, Thermal Comfort 3000 represents the future of climate control technology. Its combination of smart features, user-centric design, and sustainability makes it an ideal solution for enhancing thermal comfort in any indoor environment. With its innovative approach, it not only ensures comfort but also promotes energy efficiency and environmental responsibility, making it a worthwhile investment for modern living.
Top Page Image Contents