H -- REGIS
H -- REGIS
SEA RC H
00 00 4- 0
PIN :
H -- REGIS
PI N:

Butler 2000 C

• When “PIN :“ is displayed, enter the PIN code of the base unit (PIN code = ‘0000’).

After entering the 4 digit PIN code, press the OK button.

The unit returns to the

“H-REGISTER” menu.

4.3Subscribing a handset to the Topcom Freeport base station

Base station

Put the Freeport base into subscribing mode, by removing and reconnecting the adapter from your Freeport. The antenna LED blinks on the Freeport base. You now have 5 minutes to subscribe the handset.

Handset

Press the Function button until “H-REGISTER” is shown on the display.

Press the OK button.

On the display “SEARCH BS 1” is shown.

Press the Function button.

The base number changes from 1 to 4.

As soon as the handset has found the correct base number, press the OK button.

When the handset is looking for the base

unit, the RFPI Code is displayed.

Press the OK button.

When “PIN : “ is

displayed, enter the PIN code of the base unit (PIN code = ‘1111’).

After entering the 4 digit PIN code, press the OK button.

The unit returns to the

“H-REGISTER” menu.

4.4Subscribing a handset to another DECT base station

The DECT base has to be GAP compatible, other- wise you will not be able to subscribe the Butler 2000C handset to this base.

Base station

Put the base in subscription mode. Refer to the user manual of your DECT base. When the DECT base is in subscription mode, go to the handset registration.

43

Page 43
Image 43
Topcom 2000 C manual Subscribing a handset to the Topcom Freeport base station, Base station