Butler 2000 C
5.13.4Search and automatic dial of a telephone number
• Press the Function button
until “PHONE BOOK” is | PHONE BOOK |
shown on the display. |
|
•Press the OK button.
•Press the 3or4button until the desired name appears on the display.
•Press the Line button and the number will be dialled automatically.
Note : When the name is shown on the display, you can also display the telephone number by pressing the OK button.
5.14 Giving a name to a handset
This function allows you to give a name to a hand- set. Every time the unit is in standby mode, this name appears on the display.
• Press the Function button
until “USER NAME” is shown on the display.
• Press the OK button.
• “NAME” appears on the display.
• Use the numerical buttons to enter the name.
• Press the OK button to confirm.
For example ‘KIM’
•Press the Function button and select ‘User Name’.
•Press the OK button. ‘Name’ is shown on the display.
•Press ‘5’ twice (‘K’ appears).
•Press ‘4’ three times (‘I’ appears).
•Press ‘6’ once (‘M’ appears).
5.15 Telephone exchange (PABX)
5.15.1Setting the PABX external line number
•Press the Function button
until “PABX SETTING” is shown on the display.
• Press the OK button.
• “PABX SET 1” appears on the display.
• Press the OK button again and enter the external line number, for ex. 0. Press the OK button to confirm.
Note : When the external line number has not been programmed, ‘EMPTY’ appears on the display.
5.15.2Erasing a PABX external line number
•Press the Function button until “PABX SETTING” is shown on the display.
•Press the OK button.
•“PABX SET 1” appears onthe display.
PABX SETTING
PABX SET 1
50
