Butler 2000 C
duration is shown on the display.
•To end the call, press the Hookswitch button.
•After the call, the display shows the call duration for another 2 seconds.
5.2.2External Call Setup with Dial Preparation
• Enter the desired telephone number.
• Press the Hookswitch button. During the dialling, the number can be corrected by pressing the Erase button. The maximum number of digits you can enter is 25. If the user tries to enter more than 25 digits, an error tone is generated and the excessive digits are ignored.
5.2.3Redial
The last three dialled numbers are saved in the Redial memory. They can be called by pressing the Redial button [R/P].
•Press the Redial button repeatedly to step through the different numbers in the Redial memory.
•Press the Hookswitch button. The Redial button also functions as a Pause button (see 5.4 Pause).
5.2.4Internal Calls between Handsets
If you want to talk to another handset, take the following steps :
•Press the [INT] button.
•Enter the number of the desired handset.
•Press, the Hookswitch button of the called handset to answer the incoming internal call.
•Press the Hookswitch button when you want to terminate the internal call.
Note : When a handset is in communication with another handset, you will hear a busy tone when you try to reach one of these handsets.
5.3 External Call Transfer
When you are in communication with an external caller and you want to transfer this external call to another internal handset, take the following steps :
•Press the [INT] button, followed by the number of the desired handset.
•As soon as the called handset starts to ring, the Hookswitch will be pressed. Both handsets are now connected.
•The first handset will connect the external call to the second handset by pressing the Hookswitch. If the second handset doesn’t answer, press the [INT] button again and the first handset will be connected to the external call again.
5.4 Pause
While entering a phone number you can add a pause to this number by pressing the Pause button [R/P]. It should not be the first digit of a telephone number otherwise the Pause button will be inter- preted as a Redial button.
45
