Butler 2000 C
•Press the OK button, the programmed external line number is shown on the display.
•Press the Mute button 3
times, INPUT NUM’ appears | INPUT NUM |
on the display. |
|
• Press the OK button. |
|
6 FUNCTIONS
6.1 The Base station
Handsets can be subscribed to 4 different base stations. When a handset is subscribed to several base stations, you can choose which base station you want to work with.
Note : When you select “BASE NO:AUTO”, the base unit is searched automatically. If there ar e more than two base units, the handset selects an arbitrary base station. This is only possible when the handset is subscribed to several base units.
6.2 Select a base station
• Press the Function button until “SELECT BASE” appears on the display.
• Press the OK button.
• The base number is shown on the display, for ex. “BASE NO:1”.
•Press the Function button.
•The base numbers appear on the display “BASE NO:1 ~ 4, AUTO”.
•When the desired base number is shown on the display, for ex.
“BASE NO : 2”, press the OK button.
•Let’s assume that the
handset was subscribed to base unit 2 and that the handset number is now “MULTI 1”. If you want to subscribe this handset to base unit 2 again, select de base unit
“BASE NO: 2” and press
the OK button. Display : “NEW BASE:2”
Note : If the handset was never subscribed to base station 2, the following is displayed : “NOT SUB2”.
• On the display “BASE :
2” is shown.
• Press the OK button to subscribe the new base station.
• The unit returns to idle | M | |
mode, “MULTI 2” appears | ||
| ||
on the display. |
|
51
