OGATECH
5.Press OK
6.Enter the name
7.Press OK to validate
While entering the name, press ‘c’ to delete a character and press and hold 
to exit the menu without taking any modifications into account.
4.6Changing the PIN code
Certain functions are only available to users who know the PIN code. By default this is PIN code = 0000.
To change the PIN code:
1.Enter the menu by pressing 
/OK
2.Select SETUP using the up 
and down 
keys
3.Press OK
4.Select PIN CODE using the up 
and down 
keys
5.Press OK
6.Enter the old 4 figure PIN code.
7.Press OK
8.Enter the new 4 figure PIN code
9.Press OK
10.Enter the new PIN code a second time
11.Press OK to validate
4.7Setting the dialling mode
There are two types of dialling mode:
•DTMF/Tone dialling (the most common)
•Pulse dialling ( for older installations )
To change the dialling mode:
1.Enter the menu by pressing 
/OK
2.Select setup using the up 
and down 
keys
3.Press OK
4.Select DIAL MODE using the up 
and down 
keys
5.Press OK
6.Select the dialling mode using the up 
and down 
keys
7.Press OK to validate
4.8Flash time duration
1.Enter the menu by pressing 
/OK
2.Select SETUP using the up 
and down 
keys
3.Press OK
4.Select RECALL using the up 
and down 
keys
5.Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time (250ms)
22 | OGATECH |
