
OGATECH
3.3Receiving a call
When the handset rings, press to answer. You are then connected to your correspondent. If the
3.4Making an external call
3.4.1 Normal
1.Press
2.Enter telephone number
3.4.2 Block dialling
1.Dial your correspondents number
2.Press
To correct a number use the key to delete an entered digit
3.5Making an internal call
1.Press INT
2.Enter the number of the internal handset (1 to 5)
3.6Internal call transfer
When you want to transfer an external call to another handset:
1.During a conversation, press INT
2.Select the number of the internal handset, the external caller is put on hold.
3.When the other handset picks up, press to hang up and transfer the call.
If the internal corespondent does not
3.7Conference Call
Only possible when more than one handset are registered to the base!!
You can converse simultaneously with an internal correspondent and an external correspondent.
When you are on line with an external correspondent:
1.Press INT
2.Enter the number of the internal handset that you want to call
3.When the internal correspondent picks- up, press and hold #
4.If the internal correspondent does not answer, press INT again to reconnect to the external correspondent
3.8Display of call duration
The call duration is displayed after 15 seconds, in minutes - seconds. At the end of each call, the total call duration is displayed for 5 seconds.
3.9Microphone mute
It is possible to mute the microphone during a conversation.
Press during the conversation, the microphone is then deactivated, you can talk freely without being heard by the calling party.
“MUTE” is displayed. Press again to return to normal mode.
ENGLISH
OGATECH | 17 |