Reelmaster 4000–D Page 4 – 89 Hydraulic System
11. Use a complete repair kit when rebuilding the cylin-
der. Put a coating of oil on all new seals, and O–rings.
Install the new seal and O–rings.
12. Install head onto piston rod.
13. Install piston onto piston rod with O–ring seal (9) and
tighten hex nut.
14. Put a coating of oil on all cylinder parts to ease as-
sembly.
15. Slide piston rod assembly into cylinder tube.
16. Install head into tube. Install threaded cap and tight-
en set screw.
Hydraulic
System