Reelmaster 4000–D
Page 3 – 14
Kubota Diesel Engine
9. Clamp to prevent drainage, and disconnect the fol-
lowing fuel hoses:
A. Suction hose at the injector pump from the fuel
filter. Suction and discharge hoses at the fuel pump
(Fig. 22).
B. Return hose from the fuel injectors (Fig. 23).
10. Disconnect wire harness and electrical wires from
the engine as follows:
A. Disconnect wire and connector from the alterna-
tor, red cable from starter, three wires from the start-
er, wire from the oil pressure switch, and wires from
high temperature warning and shutdown switches
(Fig. 20).
B. Disconnect electrical connector from the fuel so-
lenoid (Fig. 22).
C. Disconnect red/black wire from the glow plug
bus bar (Fig. 23).
11. Disconnect throttle control cable from the swivel le-
ver and R–clamp from the engine plate (Fig. 24).
Figure 22
1. Injector pump suction
2. Fuel pump suction 3. Fuel pump discharge
4. Fuel solenoid
4
1
2
3
Figure 23
1. Injector return hose
2. Glow plug wire
3. Exhaust tube
4. Bracket
5. Lift tab
1
2
5
Figure 24
1. Throttle control cable
2. R–clamp
3. Swivel
4. Swivel lever
5. Engine plate
6. Screw
2
3
4
1
6
5
3
4
2