Reelmaster 4000–D Page 6 – 3 Axles and Brakes
Adjustments
Hand Brake and Traction Switches
Over time the hand brake cable will stretch and cause
the engine not to start. If this happens, adjust the cable.
1. Pull hand brake lever to 3rd click.
2. Pull hand brake up one additional click.
3. Adjust four U–bracket nuts equally so the spring has
tension. Adjustment affects operation of traction
switches.
4. Adjust four U–bracket nuts so engine will start and
run when hand brake is at the fourth click, but will not
start or run when hand brake is at second click.
1. Hand brake
2. Brake cable
3. U–bracket
4. Traction switches
5. Traction pedal
Figure 2
Axles and
Brakes