220 If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.1.2
spindle. Close the drive tray carefully, making sure it has shut
completely.

You press the disc eject button, but the drive tray does

not slide out.

Make sure the computer is connected to a power source and
turned on. The DVD-ROM or DVD-ROM/CD-RW drive
eject mechanism requires power to operate.
To remove a disc without turning on the computer, use a
narrow object, such as a straightened paper clip, to press the
manual eject button. This button is in the small hole next to
the disc eject button on the right side of the computer.

Some discs run correctly, but others do not.

If the problem is with an application CD-ROM, refer to the
software’s documentation and check that the hardware
configuration meets the program’s needs.
The color of the materials used to make the disc can affect its
reliability. Silver-colored CD-ROMs are the most reliable,
followed by gold-colored CD-ROM. Green-colored CD-
ROMs are the least reliable.
WinDVD problems: general issues
WinDVDTM ha s been configured to provide optimum
performance and quality based upon your system’s available
resources. Changes made to the system or its configuration
may impact the playback performance of the WinDVD
player.

WinDVD controls are disabled.

Controls may be grayed out by commands on the DVD disc.
For example, it is common for DVD movie titles to disable
fast-forward and rewind during the legal notices at the
beginning of a movie.