54 Getting Started
Using the computer for the first time
5.375 x 8.375 ver 2.1.2
left one and corresponds to the left mouse button. To double-
click, press the primary button twice in rapid succession.
The function of the secondary button depends on the program
you are using. It usually corresponds to the right mouse
button. Check your program’s documentation to find whether
it uses the secondary mouse button.
Disabling or enabling the TouchPad
The TouchPad is enabled by default. To change the enable/
disable TouchPad setting:
1Click Start, Control Panel.
The Control Panel window appears.
2Click Printers and Other Hardware.
3Click Mouse Properties.
The Mouse Properties window appears.
4Click the TouchPAD ON/OFF tab.
The TouchPAD ON/OFF tab view window appears.
5Select Disable or Enable, whichever is appropriate.
6Click Apply.
7Click OK.
The Mouse Properties window closes.
8Close the Printers and Other Hardware window.
9Close the Control Panel window.
You can also use a hot key to disable or enable the
Touc hP ad .