66 Getting Started
Using external display devices
5.375 x 8.375 ver 2.1.2
2Release the Fn key.
NOTE: You can also change these settings using the Display
Properties box in the Control Panel.
Adjusting the quality of the external display
To obtain the best picture quality from your external display
device, you may need to adjust the video settings. See the
documentation supplied with the device for additional
configuration steps.
TECHNICAL NOTE: In order to use the simultaneous mode, you
must set the resolution of the internal display panel to match the
resolution of the external display device. The external display
device must support a resolution of 640 X 480 or higher.
Display limitations
The quality of the display is limited to the capabilities of the
external video device.
❖If the external video device, such as an SVGA monitor, is
capable of displaying at a maximum resolution of 640 x
480 and your system is set for a higher resolution, only
part of the desktop will appear on the screen. You can
view the “lost” area by scrolling to it.
❖If you use the display hot key (Fn + F5) to change the
display output with the LCD Display Stretch option
enabled and the Display area (resolution) set to 640 x 480
or 800 x 600, the image on the internal display panel may
appear stretched.