Toshiba 3520C - page 29

Toshiba e-STUDIO3520c
Copyright © 2008 BERTL Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 29
August 2008
Toshiba e-STUDIO3520c
www.BERTL.com
The user then simply slides out and removes the old cartridge,
and slides in the new replacement cartridge.
MISFEED ACCESS
Above and below: The e-STUDIO3520c’s designated paper-
misfeed access areas are highlighted in the above figure. If a
misfeed occurs, it is indicated on the touch screen, which displays
each step necessary to locate and correct the misfeed.
In order to access any misfeeds that may occur in the automatic
document feeder, the user lifts up this cover and removes the
jammed paper from under the guide plate.
To access the fuser and side misfeed-access area, the user first
opens the automatic duplexing unit.