Toshiba e-STUDIO3520c
Copyright © 2008 BERTL Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 30
August 2008
Toshiba e-STUDIO3520c
www.BERTL.com
To remove a paper jam in the fuser unit the user must open both
the automatic duplexing unit and the jam releasing cover.
If the paper jam occurs in the Reversing Automatic Document
Feeder, the user must open the reverse cover and remove the
original.
When the optional finisher is installed, the Bridge Unit cover can
be lowered to remove any paper jammed between the fuser and
the finisher.
Paper jams can occur in the large capacity feeder. When this
occurs, users can simply open the large capacity paper feed
cover and remove the jammed paper.