Toshiba e-STUDIO3520c
Copyright © 2008 BERTL Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 33
August 2008
Toshiba e-STUDIO3520c
www.BERTL.com
WHAT WE LIKED
The control panel’s hard keys are large, well-organized
and clearly labeled, while the touch screen features
large text for easy viewing, as well as a simple design
for easy navigation. The touch screen is virtually the
same as other Toshiba e-STUDIO devices’ touch
screens, which will make it especially easy for e-
STUDIO users to quickly acclimate to it.
The e-STUDIO3520c’s LCD-color touch screen
provides easy access to several common and
frequently used copier settings on the Basic Copying
screen. This enables copy users to quickly and easily
make typical settings without having to navigate
through to many sub-menus, and significantly reduces
the time to make copy-job settings. BERTL was able
to make frequently used copier settings in a matter of
only 2 or 3 key presses (see “Selections Required for
Frequently Used Copy Functions” chart on page 18).
For network and device management, Toshiba
provides its TopAccess Web Software Suite.
TopAccess Internet Services provides an easy-to-use
Web-based interface, and can be used to view detailed
system and consumables’ status. It also enables
administrators to manage and configure device and
network settings. This Web-based solution enables
administrators to monitor and manage a fleet of
devices from any workstation on the network.
TopAccess Internet Services provides automatic e-mail
alerts when the system requires attention.
Both PCL and PostScript drivers are relatively easy to
use and logically organized. Both drivers have nearly
the same exact user interface. This will enable users
to quickly and easily switch between drivers and allow
them to find the settings they need from one driver to
another with ease.
Very easy toner and paper replacement. Ability to
change paper while in use.
Misfeed-access areas are easy to locate and access.
Correcting paper jams can be easily accomplished by
following the step by step guide displayed on the
control panel.
WHAT WE WOULD LIKE TO SEE
Overall, BERTL found the e-STUDIO3520c very easy
to use and maintain, we would have liked to have seen
device status and consumable levels communicated
using the print driver.
Despite the fact that the e-STUDIO3520c offers users
the ability to print to Front and Rear Covers, the e-
STUDIO3520c only allows users to copy to the Front
Cover and not the Rear Cover.