ADJUSTMENTS
PROGRAMMING CHANNEL MEMORY
The channel memory is the list of TV channel numbers the TV tunes in when you press the CHANNEL s or t button.
First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area automatically.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels. Note: If you utilize both
SPECIFIC INFORMATIONS GENERAL
TV/CABLE function
1 Press MENU, then press S or T until the SET UP menu appears.
2 Press t (or s) until “TV/CABLE” is highlighted.
3 Press :or ;to highlight either “TV” or “CABLE”, whichever you use.
CH PROGRAM function
1 Select “CH PROGRAM” following steps 1 and 2 above.
2 Press : or ; to start channel programming.
The TV will automatically cycle through all the TV or CABLE channels selected by the TV/CABLE function, and store active channels in the channel memory.
3 When channel programming is complete, you will see the message to the right appears.
4 Press CHANNEL s or t to make sure the channel programming has been done properly.
ADD/ERASE function
After performing the CH PROGRAM function, you can add or erase specific channels.
1 Select the channel you want to erase using the CHANNEL
sor tbutton, or select the channel you want to add using the Channel Number buttons.
2 Press MENU, then press S or T until the SET UP menu appears.
3 Press t (or s) until “ADD/ERASE” is highlighted.
4 Press S or T :
To erase the channel press the button until “ERASE” is highlighted.
To add the channel press the button until “ADD” is highlighted.
5 Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.
Note: The CHANNEL t/s buttons on the TV function as the t/s buttons while a menu is on the screen.
* Please refer to owner's manual in detail.
– 20 –
