Troubleshooting 127
Wireless l_em_orkplvblems

Wirelessnetworkproblems

Check that the router/AP (Access point) power is On.
After starting wirelessnetwork setup, confirm thatthe network is
configured properly by performing thenetwork connection test, see
"Network Connection Test" on page 113.
Check the router/AP's connection status.
Ifthe router/AP does not support PBC or WPS, Easy Setup(PBC)
will not work evenif thepush-button is pressed, see "Wireless
Setup" onpage 106.
Ifthe available router/AP list isnot displayed in Easy Setup (PBC)
orAssisted Setup, the power ofthe router/AP may be Off. Check
that it is On, and then try restarting the scan for available routers/
APs, see "Easy Setup using PBC (Push button configuration)" on
page 107.
Refer to the router/AP's instruction manual.
lVlediaShareproNems
Incorrect functionality may occur when using aUSB HUB
connection.
Photo files that were processed and edited using the computer's
application software may not be viewable.
The TVmay select one format automatically and play it when
contents that support two or more formats are played.
Confirm that the contents ofthe USB storage device are in formats
that are supported bythis TV, see "MediaShare (Videos, Music, and
Photos)" onpage 83.
Copyright protected content stored on the media server may notbe
playable on the TV.
Content playback stability may be affected by heavy network
traffic.
Content originally recorded on a computer may notplay correctly.
Setthe media sharing of the media server to the correct settings,
according to the media server instruction manual.
Depending on the media server, access may be limited by the MAC
address. Set the server according to the media server's instruction
manual.
This TV's MAC Address can be confirmed in the Network Setup
portion of the User Menu, see "MAC Address" on page 113.