Se_ingupyourTV 49
Stor#_g c'ham_elsit_memol_ (optiot_al)
3Open the Channel Tuning menu, highlight ANT/CABLE In,
and then press the OK button.
(Sample Image) Cham_el tm_i_g metal -It_put co_figuratio_
selecdo_
4 Press the A/T (arrow) buttons to select the input source (Cable
or Antenna), and thenpress theOK button to save your new
settings.
Storingcl annelsinmemory(opUonal)Tomake sureyour TV stops only onthe channels you want when
you press the A/T (arrow) buttons on the remote control or the
control panel, store those channels inthe TV's memory.
AutoTuning
You can set up the TV to detect all active channels inyour area and
store them in its memory. Then you can manually add or erase
individual channels from memory.
NOTE ¢. YoumustsetuptheANT/CABLEinputsourcebefore
programmingchannels.See"ANT/CABLEIN"onpage48.
¢ Theautomaticchannelprogrammingprocesswill erase
channelsthatwerepreviouslyprogrammedintotheTV's
memory.
¢ TotunetheTVtoachannelnotprogrammedinthechannel
memory,you mustusetheChannelNumber buttonsonthe
remotecontrol.
¢ ProgrammingchannelswhentheANT/CABLEinputis
configuredfor Cablewilltakesubstantiallylongerthanwhenthe
antennainputisconfiguredforAntenna.Thisisnormal;
however,oncechannelprogrammingisfinished,youshouldnot
havetorepeattheprogrammingprocessagainunlessyourCable
TVservicelineupchangessignificantly.