Toshiba 40L3400U manual NoSignalPowerDown, UsingHOMPCEC, SettingupyourTV QQ, No 5ial Power Down

SettingupyourTV QQ

No 5'i_al Power Down

Press the Number buttons to enter the length of time (maximunl of 12 hours) and then press the OK button. Or press the A/T (arrow) buttons to increase or decrease in 10-minute increments (nlaxinmm of 12 hours).

NOTE Ifapowerfailureoccurs,thesleeptimersettingmaybecleared.

To display the time remaining until the TV turns off, press the SLEEP button.

To cancel the sleep timer, repeatedly press SLEEP until it is set to 0 minutes.

NoSignalPowerDown

The TV wilt automatically turn itself off after 15 minutes when no signal is detected. You can change the setting to Offfor the following purposes:

•*** Low signal strength of analog channel (no signal detection)

•*** Only Audio L/R is connected to external input to listen to music through the TV speakers.

To change the no signal power down setting:

1From the Options menu, highlight Power Management, and then press the OK button.

2Highlight No Signal Power Down, and then press the OK button.

3Press the A/T (arrow) buttons to highlight the item you want to change, and press the ,_/_ (arrow) buttons to select On or Off.

NOTE '¢*Defaultsettingforthis featureis On.

¢, Awarningmessagewill appear1minutebeforetheTVturnsoff.

UsingHOMPCEC

This is a new feature that uses CEC technology and allows you to control Toshiba HDMI _ CEC compatible devices from the TV remote via HDMI _ (see "HDMI(R) CEC connection" on page 31) When Enable HDMI CEC Control in the HDMI CEC Control

Setup menu is set to On (see "Setting up HDMI(R?CEC" on page 96), the HDMI _ CEC functions described below will be enabled.