HM66_EN.book Page 24 Thursday, February 23, 2006 2:49 PM
Chapter 5: Using the TV’s basic features
Input labeling example:
The screen below left shows the default Input Selection screen (with none of the inputs labeled). The screen below right is an example of how you could label the inputs if you had connected a DVD player to VIDEO 1, Cable TV to VIDEO 2, a video recorder to ColorStream HD1, a DTV
Tuning channels
Using the Channel Browser™
The Channel Browser™ stores the most recently viewed channels or inputs in a history list. In addition, it provides a list of all the available channels on the ANT1 input (up to 2000), the ANT2 input (up to 2000) and a list of all the inputs on the TV. This feature allows you to:
Input Selection | ANT 1 |
0 ANT 1
1Video 1
2Video 2
3ColorStream HD1
4ColorStream HD2
5HDMI 1
6HDMI 2
7ANT 2
0 - 7 / INPUT to Select
Input Selection screen with no inputs labeled
Input Selection | ANT 1 |
0 ANT 1
1DVD
2Cable
3Video Recorder
4ColorSteram HD2 (Hidden)
5DTV
6Satellite/DSS
7ANT 2
0 - 7 / INPUT to Select
Input Selection screen with
all inputs labeled except input 4, which has been hidden.
• Keep a history of the last 32 channels or inputs viewed. |
• Quickly surf and tune your recently viewed channels/inputs |
from the Channel Browser™ banner (illustrated on the next |
page). |
• Surf via Browse mode (to immediately tune channels as you |
highlight them in the Channel Browser™ banner) or Select |
mode (to surf over channels in the browser banner before |
you select one to tune). |
• Quickly change inputs from the Inputs List. |
• Set a “HOME” source for an ANT1 or ANT2 channel or TV |
To clear the input labels:
1 Press Yand open the Preferences menu.
2 Highlight Input Labeling and press T.
3 Highlight Reset and press T.
input. |
To set the Channel Browser™:
1 Press Yand open the Preferences menu.
2 Highlight Channel Browser Setup and press T.
3 Press B to highlight Navigation, and then press C or c to select either Browse Mode or Select Mode.
Channel Browser Setup
Navigation |
| Select Mode | ||
History List |
| Power Off Clear(On) | ||
|
| |||
ANT1 List |
| On | ||
|
|
|
|
|
ANT2 List |
| On | ||
|
|
|
|
|
Inputs List |
| On | ||
|
|
|
|
|
| Reset |
| Done |
|
|
|
|
|
|
4 Press b to highlight History List field, then press C or c to select the setting you prefer either Power Off Clear (On), On or Off.
Note: When History List is set to On, the channels and inputs stored in the list will be saved through power on and off. When History List is set to Power Off Clear (On), the channels and inputs stored in the list will be cleared with every power on/off cycle of the TV.
5 Press b to highlight ANT1 List field, then press C or c to select On or Off.
6 Press b to highlight ANT2 List field, then press C or c to select On or Off.
7 Press b to highlight Inputs List field, then press C or c to select On or Off.
8 To save your entries, highlight Done and press T.
To return to factory defaults, highlight Reset and press T.
24
HM66 (E/F) Web 213:276
