HM66_EN.book Page 33 Thursday, February 23, 2006 2:49 PM
Chapter 5: Using the TV’s basic features
Selecting stereo/SAP broadcasts
The
The MTS feature is not available when the TV is in VIDEO mode. When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” appears
To listen to stereo sound:
1 Press Yand open the Audio menu.
2 Highlight Audio Setup and press T.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
3 In the MTS field, select Stereo.
Audio Setup
MTS |
| Stereo | ||
|
|
| ||
Language |
| English | ||
|
| |||
Speakers |
| On | ||
|
| |||
Optical Output Format |
| Dolby Digital | ||
|
|
|
|
|
| Reset |
| Done |
|
|
|
|
|
|
4 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.
Notes:
•If you leave the TV in Stereo mode because it will automatically output the type of sound being broadcast (stereo or monaural).
•If the stereo sound is noisy, select Mono to reduce the noise.
To listen to an alternate language on an ATSC digital station (if available):
Highlight the Language field in step 3 above, and then press C or c to select the language you prefer.
To listen to a second audio program on an analog station (if available):
Select SAP in step 3 above.
Notes:
•A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio.
•If you have SAP on and the station you are watching is not broadcasting a second audio program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble, and balance.
To adjust the audio quality:
1 Press Yand open the Audio menu.
2 Highlight Audio Settings and press T.
3 Press b or B to highlight the item you want to adjust (Bass, Treble, or Balance).
Audio Settings
Bass100
Treble100
Balance0
StableSound | Off |
ResetDone
4 Press C or c to adjust the level.
•C makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected).
•c makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected).
5 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.
33
HM66 (E/F) Web 213:276
