Toshiba 50HM66, 56HM66 Using the TV’s basic features, Selecting the video input source to view

HM66_EN.book Page 23 Thursday, February 23, 2006 2:49 PM

Chapter 5: Using the TV’s basic features

Selecting the video input source to view

To select the video input source to view:

1 Press +on the remote control or INPUT on the TV control panel.

2 Press 0–7 to select the input source you want to view, which will depend on the input terminals you used to connect your devices (- Installation Guide).

The current signal source displays in the top right corner of the Input Selection screen.

Input Selection ANT 1

0 ANT 1

1Video 1

2Video 2

3ColorStream HD1

4ColorStream HD2

5HDMI 1

6HDMI 2

7ANT 2

0 - 7 / INPUT to Select

Notes:

•When the Input Selection screen is open, you also can use Bb on the remote control (or the CHANNEL U u buttons on the control panel) to change the input.

•You can repeatedly press +on the remote control or the INPUT button on the TV control panel to change the input.

•You can label the video input sources according to the specific devices you have connected to the TV

(- “Labeling the video input sources” at right).

•The source can be “hidden” (- “Labeling the video input sources” at right).

Labeling the video input sources

You can label each video input source according to the type of device you connected to each source, from the following preset list of labels:

•“– –”(default label)

•Cable

•DTV

•Satellite/DSS

•VCR

•Laser Disk

•DVD

•Audio Receiver

•Compact Disc

•Video Recorder

•Game Console

•Hide (to hide an unused input in the Input Selection screen)

Note: If you select ANT 2 in the Input selection screen, you can select either “– –” or “Hide”.

To label the video input sources:

1 Press Yand open the Preferences menu.

2 Highlight Input Labeling and press T.

3 Press B or b to highlight the video source you want to label.

Preferences

	Favorite Channels
	Closed Caption Mode		Off
	Closed Caption Advanced
	Input Labeling
	Menu Language		English
	Channel Browser Setup
	Navigate ENTER		Select CH RTN Back EXIT Exit
Input Labeling
Video 1					DVD
Video 2					Cable
ColorStream HD 1				Video Recorder
ColorStream HD 2					Hide
HDMI 1					DTV
HDMI 2				Satellite/DSS
ANT 2			- -
		Reset		Done

4 Press C or c to select the desired label for that input source. If a particular input is not used, you can select Hide as the label, which will cause that input to be “grayed out” in the input list and skipped over when you press +on the remote control.

5 To save the new input labels, highlight Done and press T. To revert to the factory default labels, highlight Reset and press T.

(continued)

23

HM66 (E/F) Web 213:276