Toshiba 6520c, e-STUDIO5520C 10 BASIC Menu for the Copier Function, Equipment status indication area

1 BEFORE USING EQUIPMENT
10 BASIC Menu for the Copier Function
Equipment status indication area
The equipment status indication area shows the following information:
1. Receiving tray indication ( P.4 0)
This shows the tray to which copied paper exits.
2. [EXIT TRAY] button ( P.40)
This is for switching receiving (exit) trays.
3. Drawer buttons ( P.55)
These show the size of paper, amount of paper remaining in each drawer and the paper type set for the drawer. When
you want to use a particular drawer, press the corresponding button.
The button for the 2 trays of the Tandem Large Capacity Feeder shows the amount remaining in each tray.
If the paper size cannot be detected in this equipment, “UNDEF” appears. In this case, check the following two items.
- Is unacceptable sized paper placed in the drawer?
 P.11 “Acceptable copy paper”
- Is the gap between the paper and the side or end guides too big?
 P.13 “Placing paper in drawers”
If the indication still remains, contact your service representative.
4. [BYPASS FEED] button ( P.41 )
When this button is pressed with paper set in the bypass tray, it will be selected as the paper source.
5. Paper type on the bypass tray ( P.41 )
This shows the type of paper placed on the bypass tray with an icon.
2
1
3
5
4