Toshiba 6520c, e-STUDIO5520C „ Scanning the next original during copying, Confirming auto jobs

2 HOW TO MAKE COPIES

„Scanning the next original during copying

Even if copying is in progress or “READY (WARMING UP)” is displayed on the touch panel, you can scan the next original (auto job start). Up to 10 jobs can be stored in the memory.

1

2

Place the original(s).

Set the number of copy sets and the copy modes as required.

The new job starts in the copy modes that you previously selected unless you select other modes.

3 Press the [START] button on the control panel.

y Up to 10 jobs can be stored in the memory. When the originals for the 11th job are placed and the [START] button is pressed, “Auto Start” appears on the touch panel. Scanning of the 11th job starts when a waiting space for this job becomes available as the preceding jobs are processed.

yA maximum of 1000 sheets (A4-size and LT-size originals) can be scanned per 1 copy job or up until the embedded memory becomes full.

Confirming auto jobs

You can confirm which jobs are in waiting on the touch panel or cancel them as required. For details, see the following page:

P.186 “Confirming Copy Job Status”

Canceling jobs being scanned

Press the [STOP] button on the control panel to stop a job while originals are being scanned.

When you press [MEMORY CLEAR] on the touch panel or the [FUNCTION CLEAR] button on the control panel while the scanning is being paused, the scanning will end. (In this case, the data which were scanned before the job is paused will be copied.) To restart the scanning, press the [START] button.

To cancel the 11th auto job, press the [STOP] button.

36 Making Copies