Toshiba 6520c, e-STUDIO5520C Placing paper in the Tandem Large Capacity Feeder

1.BEFORE USING EQUIPMENT
Placing Paper 21
1 BEFORE USING EQUIPMENT
4
Select the paper type.
1) Select the drawer in which you placed paper.
2) Select the paper type.
5
Press the [USER FUNCTIONS] or [COPY] button on the control panel.
The menu returns to the BASIC menu.
Clearing the set paper type
Press the drawer button on the menu in step 4, and then press the paper type whose setting you want to clear.
If both INSERT 1 and INSERT 2 are set and you clear the setting of only INSERT 1, the setting for INSERT 2
automatically becomes the setting for INSERT 1.
Placing paper in the Tandem Large Capacity Feeder
This operation is applied only to the Tandem Large Capacity Feeder type.
1
Pull out the drawer of the Tandem Large Capacity
Feeder carefully until it comes to a stop.
Do not touch the slide rail (“A” in the figure on the right).
This could injure you.
2
Place 2 stacks of paper in the right and left trays
correspondingly.
Fan and jog the paper well before placing it. Place it with its copy side
up. Place one stack of paper in the right-hand tray (shown as “A” in the
figure) with its side touching the right corner of the tray, and place the
other stack of paper in the left-hand tray (shown as “B” in the figure)
with its side touching the left corner of the tray. Paper can be placed
neatly if you divide stacks into small bundles and pile them up on the
two trays alternately.
A
A
B