Toshiba 6520c, e-STUDIO5520C Bypass copying on non-standard size paper

2 HOW TO MAKE COPIES
48 Bypass Copying
Bypass copying on non-standard size paper
1
Place the original on the original glass.
yThe height of the paper must not exceed the indicator on the side guides.
yWhen you use more than one sheet of paper, fan the sheets well before placing them on the bypass tray. Be
careful not to cut your fingers when fanning them.
yDo not push paper into the entrance of the bypass feeder. This could cause a paper jam.
3
Press [CUSTOM PAPER] on the touch panel.
You can use non-standard size paper within the sizes shown on the right.
2
Place paper with its copy side down on the bypass
tray. Then align the side guides to the paper length
while holding the tab.
When paper is placed, the menu for bypass copying appears.
100 - 297 mm
(3.9" - 11.7")
148 - 432 mm
(5.8" - 17")