Toshiba A45 Series manual Removing a memory module, Press Any Key To Continue

72	Getting Started
	Installing additional memory (optional)

When the panel is properly positioned, it will snap down into place.

12Turn on the computer.

To verify that the computer correctly recognizes the memory, see “Checking total memory” on page 74.

13If the computer does not recognize the memory, shut down the computer, remove the keyboard and make sure the memory module is seated properly, as described in step 7.

Removing a memory module

If you use the computer for a long time, the memory modules will become hot. If this happens, let the modules cool to room temperature before you replace them.

Do not try to remove a memory module with the computer turned on. You can damage the computer and the device.

Do not remove the memory module while the computer is in Standby mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved.

The following message appears when you turn on the power:

Warning: Resume Failure

Press Any Key To Continue

If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for five seconds until the power turns off, then turn the power on again.

1Follow steps 1 through 5 in “Installing additional memory (optional)” on page 65.