Toshiba B-415 2.9 Media

E2-4

2. SPECIFICATIONS ENGLISH VERSION EO1-33014

2.9 Media

2.9 Media Label Receipt/Linerless

Media type Label Receipt Linerless

Item Batch Strip Without black mark With black mark With black mark

A: Label/Receipt Pitch 10 ~ 400 13 ~ 71.5 --- 10 ~ 400 10 ~ 400

B: Label/Receipt length 7 ~ 390 10 ~ 63.5 --- 7 ~ 390 7 ~ 390

C: Width including backing paper 30 ~ 104.6 + 0/ -1 ---

D: Media width 27 ~ 101.6 30 ~ 104.6 + 0/ -1 30 ~ 94.6 + 0/ -1

E: Gap/Black mark length 3 ~ 8 --- 3 ~ 8

F: Backing paper end 1.5 ~ 7 ---

G: Effective print width ~ 98.6 ~ 101.6 ~ 91.6

H: Effective print length 7 ~ 390

I: Non print area 6.4

J: Black mark width --- 14

K: Inner diameter of paper core Ø 12.7 (Ø 0.5")

L: Outer diameter of paper core (Ø 16.7)

M: Outer roll diameter (Max.) Ø 42 + 0/ -1

Feed direction

Black Mark (on reverse side)

NOTE: Do not use media other than the above to ensure print quality and print head life.

(Unit : mm)

Contents

Main FCC Notice CAUTION To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover. CAUTION CE Compliance (for EU only) Page Page Safety Summary Safety Precautions WARNING CAUTION Precautions CAUTION: TABLE OF CONTENTS 1. INTRODUCTION 1.1 Applicable Model NOTE: The B-415-GH34-GB model is for exclusive use in Great Britain. 1.2 Accessories 2. SPECIFICATIONS 2.1 Printer 2.2 IrDA Interface * Data Matrix 2.3 Serial Interface (RS-232C) (for GH24 and GH34 models) 2.5 Bluetooth Interface (for GH25 model) 2.4 Radio Interface (for GH34 model) The following specification is applicable only to the GB and QP models. 2.7 Battery 2.6 External DC Input 2.8 Option 2.9 Media NOTE: Do not use media other than the above to ensure print quality and print head life. 3. APPEARANCE 3.1 Front/Rear View 3.2 Description of LED Lamp 3.3 Description of Switch/Button 4. LOADING AND REMOVING THE BATTERY Battery Performance TO CHARGE THE BATTERY PACK Using the battery pack at once Charging time If the ERROR lamp flashes 5. ATTACHING THE SHOULDER STRAP 6. SET UP PROCEDURE 6.1 Requirements for Operation 7. LOADING THE LABEL 1 2 3 7.1 How to Load the Liner Backed Label Roll Page 7.2 How to Load the Linerless Label Roll Page 8. ISSUING THE MEDIA 4. Tear off the printed media upward or downward with the cutter. Media Fig. 8-2 9. SELF-DIAGNOSTIC TEST PRINT 9. SELF-DIAGNOSTIC TEST PRINT For GH25 model E9-1 Page 10. CARE/HANDLING OF THE MEDIA 11.1 Cleaning 11. GENERAL MAINTENANCE 11.2 Covers and Operation Panel 11.3 Removing Jammed Media 12. LED DISPLAY AND TROUBLESHOOTING NOTE: Please contact your authorized TOSHIBA TEC representative. 13. ERROR PROCESS