
8. LOADING THE PAPER
8. LOADING THE PAPER
10.For details on changing the black mark sensor position according to the black mark position, refer to the Section “Setting the black mark sensor position”. When using the round or
11.Draw the label onto the platen. Close the sensor cover and return the lock lever to lock the sensor cover tight.
12.Close the print head block by pressing both sides of the print head block’s top until it clicks.
Head Block
Fig.
NOTE: Pass the paper straight from the supply holder to paper outlet. Failure to do this may cause skew feeding or paper jam.
Platen Paper Guide Paper | Supply Holder |
A
.
A = B
.
B
Fig.