Toshiba B-450-HS-QQ owner manual Installation Procedure, Installing The Supply Holder Unit

6. INSTALLATION PROCEDURE

EO1-33019

6.1 INSTALLING THE SUPPLY HOLDER UNIT

6. INSTALLATION PROCEDURE

6.1 INSTALLING THE SUPPLY HOLDER UNIT

WARNING!

Turn the power OFF before installing the supply holder unit.

Fit the two studs on the bottom of the printer into the holes in the supply holder unit.

Supply Holder Unit

Fig. 6-1

6.2 INSTALLING THE SUPPLY COVER

Fit both hooks of the supply cover onto the shafts of the supply holder, and then gently close the supply cover. (Refer to Fig. 6-2)

NOTE: After this section, the supply cover will be removed in photos and figures. Please understand that it provides clearer descriptions.

Supply Cover

Hook

Shaft

Fig. 6-2

6-1